Payment & Shipping Terms:
|Material:||Low Carbon Iron Wire,Galvanized Wire||Hole Size:||50mmx50mm|
50mmx50mm welded wire mesh panels,
2.5mm welded wire mesh panels,
1200mm Welded Wire Mesh Panels
Low carbon galvanized iron wire/galvanized square welded wire mesh fence panels
3D wire mesh panel is a new type of building wall material. It can replace the brick wall to be used as load-bearing walls, non-load-bearing walls and floors, balconies and so on. It has features of expanding building area (10% -15%), fire resistant, noise insulation, heat insulation, earthquake resistanct, waterproof and light weight etc. All these features greatly reduce the cost of your construction project.
Wire panels generally welded with wires of diameter 2.5mm-3.0mm and surface treatment with galvanized or non-galvanized. All the processings involved in the production composing the 3D panel system are continuously abide ISO9001:2008.
EPS Polystyrene Foam:
The EPS (sintered foam polystyrene) is made up of carbon, hydrogen and air. It is realized starting from the polymerization of styrene, a monomer obtained from oil and present in common food too (ex.: wheat, strawberries, meat, coffee). The latter, before being foamed, shows itself in the shape of little transparent pearls. Thickness, shape and density of the Emmedue panel polystyrene core may change according to specific requirements. The minimum density normally used is equal to 15 kg/m³.
The side panel mesh is commonly 2" opening with 11 or 12 gauge wire, surface with galvanized wire panel or hot dip galvanized wire panel. Inserted EPS size is 2", 2.5" and 4".
|1. Wire Mesh||Materail:galvanized iron wire(electric or hot dipped)|
Mesh size:50mm x 50mm,100mmx100mm
|2. Diagonal Wire||Material:galvanized iron wire(electric or hot dipped)|
|Type:truss type and W type. Spacing as required.|
|3. EPS Core||W1200mmxL2400(length from 2000mm-6000mm)|
|Thickness:40mm or 50mm for interior wall;100mm for bearing wall;120mm for exterior wall.|
|4. Outer Shotcrete||10mm-16mm for wall, 20mm for load bearing wall.|
Benifits of 3D EPS Panel
1. Thermal Insulation
The EPS foam that is known as the internal thermal insulation to reduce the loss of heat. It also makes the comfortable indoor space regardless of temperature variation in all seasons.
2. Fire proof
It has passed the test of the national construction institute and also been approved as the fireproofing materials for internal & external construction stuffs.
3. Humidity proofing
As we have used the high performance foaming polystyrene 100m/m2 of low absorptiveness, it shows an excellent prevention against the condensation on the wall.
4. Sound proof
On the base of sound insulation performance test, 3D panel has shown a distinguished feature. Especially, it shows a good operation capability with both sides plasterboard.
5. Light weight
3D EPS panels only weighs a quarter of the masonry wall, which alleviates the fixed load of structure and highly recommended in the enlargement of old buildings.
Applicaton of 3D EPS Panel
The 3D Panel building system has tremendous flexibility - it can be used in place of wood or metal-framed walls, masonry block walls or pre-cast panels. It is an excellent structural system that can be used in floors, ceilings, and roofs. The 3D Panel building system saves construction time while providing greater structural integrity.
Qijie Wire Mesh MFG Co.,ltd is a professional manufacturer of wire mesh products with more than 20 years experience. Welcome to visit our factory located in Anping city at any time!
Hebei Qijie Wire Mesh MFG Co., Ltd
ADD.: Wanggezhuang Industrial Zone, Anping County, Hengshui City, Hebei Province, China.
Contact Person: Devin Wang