Payment & Shipping Terms:
|Material:||Galvanized Steel Plates, Stainless Steel Plates||Thickness:||1.8 - 6.5 Mm|
|Mesh:||3 - 15 Mm Hole||Surface Finish:||Nature|
|Hole Shape:||Slot||Size:||1.0 X 2.0 M, 1.2 X 2.4 M|
Galvanized Steel Perforated Metal Mesh with Slotted Holes
Slotted hole perforated metal sheets also called oblong hole perforated wire mesh.It not only has a good appearance,but also very economical.It was popular used in filtering and separation of liquids and solids,especially used in the wine and food industries.
Slotted hole perforated sheets are elongated holes either round shape or square shape ends.It can be punched into either a side staggered or a straight line pattern by the plain steel sheets,also the mesh thickness,the hole size,the material are all acceptable against the customers’ request.
The materials of slotted perforated wire mesh can be galvanized steel (hot galvanized or electro galvanized ),stainless steel,aluminum alloy and brass etc.
|Round End 45° Staggered Pattern|
|Item||a (mm)||b (mm)||t (mm)||t1 (mm)||P (%)|
|Ld 8 × 40 – 44 × 22||8||40||44||22||31.6|
|Ld 8 × 45 – 44 × 22||8||45||44||22||35.8|
|Ld 8 × 56 – 54 × 54||8||56||54||54||14.9|
|Ld 10 × 25 – 26 × 26||10||25||26||26||33.8|
|Ld 10 × 30 – 25 × 25||10||30||25||25||44.6|
|Ld 10 × 30 – 30 × 30||10||30||30||30||30.9|
|Ld 10 × 56 – 54 × 27||10||56||54||27||36.9|
|Ld 12 × 39 – 38 × 38||12||39||38||38||30.3|
|Ld 16 × 60 – 80 × 50||16||60||80||50||22.6|
|Ld 20 × 45 – 42 × 42||20||45||42||42||46.1|
The surface treatment of slotted hole perforated sheets can be galvanized,powder coated,PVC coated,PTFE coated and so on.
* Available with large percent open area
* Accurate hole sizes
* Available in lightweight materials
* Available in corrosion resistant materials
* Act as sieves for grain & seeds cleaning and drying machine
* Mill of flour and rice,
* Rope belt conveyors,
* Wall & ceiling panels,
* Cladding and sunshade,
* Fences and protective panels,
* Decorative applications, etc.
Aesthetic hole patterns
Meanwhile, to reach your desired aesthetic effect, we also supply other patterns of slot hole as your nominated, for example:
SHP-2: Decorative slot hole pattern-1
SHP-2: Decorative slot hole pattern-2
SHP-2: Decorative slot hole pattern-3
The slot hole should be punched with a width that at least the same size as the sheet thickness. When the slot width is the twice as much as the sheet thickness, the sheet performs best.
SHP-5: Slot hole perforated sheet with white PVC coating
SHP-6: Slot hole perforated sheet processing
SHP-7: Slot hole perforated metal sheet
SHP-8: Slot hole perforated metal sheet
slot hole perforated hole sheets-S0003
slot hole perforated hole sheets-S0001
slot hole perforated hole sheets-S0002
Contact Person: Devin Wang