Payment & Shipping Terms:
|Surface Treatment:||Hot Dipped Galvanized||Type:||BTO-10 ,BTO-12,BTO-18,BTO-22,BTO-25,BTO-28, BTO-30,CBT-60,CBT-65|
|Loops:||56 Loops , 33 Loops , 55 Loops , 144 Loops||Clips:||5clips , 3 Clips , Without Clip|
|Packing:||Inside Waterproof Paper||Material:||Hot-dipped Galvanized , Stainless Steel 430,|
Welded razor barbed wire is flat, so it looks aesthetically and can be used in places for people or car security where has more people. Welded razor wire mesh is a grid that has cells in the form of lozenges, made of razor barbed reinforced tape. Most welded razor wire is a canvas, rolled up in rolls.
Welded razor mesh available in a canvas 2000 mm high and has a diamond-shaped cells with a face of 242 mm, height of the diamond about 450 mm, width of the diamond 190 mm. At the vertices are connected by straps diamonds, similar bracket, used in the manufacture of concertina wire and flat barrier razor wire. Its length can vary up to 50 meters, which also affects the price of the product and installation costs. As a rule, often welded razor fencing in length is from 4 to 15-meter, as this size is most convenient for the installation of barbed wire. Before installing the razor mesh is necessary to prepare the frame. It is based on vertical racks made of galvanized pipes. They are connected by transverse bars, which will be attached to the upper part of the grid. Frequency setting poles shall be designed so that they could make installation of razor cloth desired length. The optimal distance between two adjacent columns should be no more than 2 meters. Fixing of razor barbed wire is carried to the posts and the upper cross-beams using special anchors or brackets. Mounting must be implemented so that the upper ends of the razor barbed wire diamonds above the top crossbar and prevent the penetration of the fence. At the request of the customer welded razor fence bottom may bury in the ground to 500 mm. Razor wire is galvanized, so it does not spoil the action of moisture in the soil. After installing the razor barbed wire does not need additional treatment, as it is processed further corrosion composition at the factory.
Using the following materials to make welded razor wire barbed tape:
The benefits of razor mesh security fence:
Welded razor wire is used in airports, military bases, water substation, the border fence, oil depots, factories.
Stainless steel razor wire is made with stainless steel sheet and steel wire. Stainless steel razor concertina offers longer service life compared with other materials, and much better property of corrosion resistance.
Stainless steel razor wire fence, with clips
Razor wire fencing new specification:
Production process razor wire concertina manufactured by the following technologies. First, rolled galvanized steel coils by cold forging, made barbed tape - a metal band with a sharp cutting studs on both sides. Then, barbed tape on special equipment is crimped around the guide wire. As aiming high carbon wire is commonly used spring wire. After crimping get razor concertina wire barbed tape, concertina barbed tape is practically one with the foundation, it can not in any way be separated from the carrier wire.
Barbed tape, being a modern version of barbed wire allows the construction of strong and very difficult to overcome the razor barriers, as well as other types of mechanical barriers. There is an opportunity to strengthen and recuperate existing fences. The construction of barbed tape is based on a thin steel strip with cut edges, which is compressed around a solid steel wire.
Packing: simple packing and carton packing. For simple packing, inside is water proof paper and outside is woven bags and then compression; sometimes we can load the container one coil by one coil and sometimes we can make the coils to big bundles and for loading easily. It is main for BTO-10, BTO-12, BTO-22, BTO-30 and CBT-25. Galvanized razor coils usually use this packing. For carton packing, Razor mesh coils are loading into hard cartoon boxes, it is mainly application to CBT-65, CBT-60 (450mm). Special type of packing is also available.
Installation of razor wire concertina can be used to build fences of varying height, width, thickness, both directly on the ground, and on any type of fence, as well as on the roofs and walls of the building.
Application: razor wire fencing secure the following objects: bases and depots, water conservation and environmental businesses, nuclear power plants and CHP plants, hydropower plants and power plant, gas supply and gas distribution facilities, facilities of defense, the interior ministry and penitentiary, areas of mining and border regions . In recent years, concertina coil has become popular for the installation of safety barriers in horticulture, in suburban areas, and private facilities. Razor wire concertina is often used as mobile security barrier to enclose an area.
Razor concertina security fencing sizes:
All the specification and packing can be designed according to the customers need.
|Model||Thickness||Wire dia||Barb Length||Barbed Width||
|Outside diameter||No. of loops||The utmost effective length||Type||Notes|
|450 mm||33||7 - 8 M||CBT 60.65||Single coil|
|500 mm||56||12 - 13 M||CBT 60.65||Single coil|
|700 mm||56||13 - 14 M||CBT 60.65||Single coil|
|960 mm||56||14 - 15 M||CBT 60.65||Single coil|
|450 mm||56||8 - 9 M (3 CLIPS)||BTO - 10.12.18.22.28.30||Cross type|
|500 mm||56||9 - 10 M (3 CLIPS)||BTO - 10.12.18.22.28.30||Cross type|
|600 mm||56||10 - 11 M (3 CLIPS)||BTO - 10.12.18.22.28.30||Cross type|
|600 mm||56||8 - 10 M (5 CLIPS)||BTO - 10.12.18.22.28.30||Cross type|
|700 mm||56||10 - 12 M (5 CLIPS)||BTO - 10.12.18.22.28.30||Cross type|
|800 mm||56||11 - 13 M (5 CLIPS)||BTO - 10.12.18.22.28.30||Cross type|
|900 mm||56||12 - 14 M (5 CLIPS)||BTO - 10.12.18.22.28.30||Cross type|
|960 mm||56||13 - 15 M (5 CLIPS)||BTO - 10.12.18.22.28.30||Cross type|
|980 mm||56||14 - 16 M (5 CLIPS)||BTO - 10.12.18.22.28.30||Cross type|
Contact Person: Devin Wang