Product Details:
Payment & Shipping Terms:
|
Material: | Mild Steel Sheet | Pitch: | 40 X 100 Mm |
---|---|---|---|
Type: | 25 X 3.0 Mm | Surface Finish: | Galvanized |
Surface: | Serrated | Size: | 1.8 X 6.0 M |
Highlight: | LTA Drainage Grating Cover,S275jr Drainage Grating Cover,Electroplate Drainage Grating Cover |
LTA Driving Ramps Grating Cover Or Drain S275jr Grating Trench Cover Electroplate For Drainage
Products Description
Vehicle Grating As Driving Ramps Or As Drain Grating For Water, Oil And So On.Vehicular gratings meet all the criteria for safety, design and functionality,Vehicular gratings are often assumed to be similar to cattle grids or cast-iron grids. However, our range is a far cry from this
as they are designed for many different installation sites and vehicles weights.
Vehicular grating design
Vehicular grating, while not always visible or cutting-edge design, invariably needs to be designed subject to specialist advice.
With our extensive experience and product range, we can help you achieve your goal.Materials and gratings for vehicular grating solutions
Whatever your requirements, we can supply a solution using our bespoke mesh grating or Optimo range, which are available in carbon
steel and stainless steel and with either a hot-dip galvanised, polyester powder-coated, chemically cleaned or electropolished
finish. PcP vehicular gratings suitable for many different applications. PcP vehicle gratings can be used for a wide range of applications, contributing to a safe working environment for employees on maintenance platforms etc. as well as safe public areas for pedestrians etc.
Places where PcP safety gratings can be used
Maintenance platforms
Grilles through which fresh air is drawn into a building following a fire must, of course, be strong enough to bear pedestrians.
Moreover, they are often also subjected to vehicular loads such as maintenance vehicles (e.g. mobile elevating working platforms
(MEWPs)), which have high point loads and are used extensively in cities owing to restricted access etc.
Horizontal gratings for coverings
A horizontal grating that provides support for architectural floor coverings in a museum must be able to withstand heavy
exhibitions etc.
Steel ramps in car parks and storage units
Modern car dealerships usually have their own dedicated car park and storage unit, often with ramps up to the various levels.
These ramps are manufactured from a steel structure to minimise construction time and cost, but they always have an open type of
non-slip grille capable of bearing cars and SUVs.
Pavement gratings for pedestrian safety in underground stations, near roads etc.
Pavement gratings, as seen in most cities, are predominantly used to provide ventilation to an underground station or car park.
First and foremost, however, they have to be heel-friendly, and secondly allow adequate ventilation. But what about emergency or
delivery vehicles – or what if an accident occurs on top of the pavement grating? If the grille is situated near a road with no
barrier protection, it will have to accommodate these requirements.
Specification
Specification of Steel Grating | |
Remarks: Special Material, High Zinc Coating and New Style can be Customized. | |
Material Standard |
ASTM A36, A1011, A569, Q235, S275JR, Stainless steel 304/316, Mild steel & Low carbon steel, etc |
Bearing Bar (Width x Thickness) |
25x3, 25x4, 25x4.5, 25x5, 30x3, 30x4, 30x4.5, 30x5, 32x5, 40x5, 50x5, 65x5, 75x6, 75x10…..100 x10mm etc; I bar: 25x5x3, 30x5x3, 32x5x3, 40x5x3 etc US standard: 1''x3/16'', 1 1/4''x3/16'', 1 1/2''x3/16'', 1''x1/4'',1 1/4''x1/4'', 1 1/2''x1/4'', 1''x1/8'', 1 1/4''x1/8'', 1 1/2''x1/8'' etc |
Bearing Bar Pitch |
12.5, 15, 20, 23.85, 25, 30, 30.16, 30.3,32.5, 34.3, 35, 38.1, 40, 41.25, 60, 80mm etc. US standard: 19-w-4, 15-w-4, 11-w-4, 19-w-2, 15-w-2 etc. |
Twisted Cross Bar Pitch | 38.1, 50, 60, 76, 80, 100, 101.6, 120mm, 2'' & 4'' etc |
Surface Treatment | Untreated(black), Hot-dipped galvanized, Powder coated, Electroplate, Painting or as per customers' requirement. |
Grating Style | Plain / Smooth, Serrated / Teeth, I bar, Serrated I bar |
Packing |
(1) Bandage and Paperboard: Generally applies to neat steel plate; (2) Screw Locking Method: Use 4 screw rods through the aperture of the steel grid, for high strength; (3) Steel Pallet: Traditional export packing. |
Payment Term | T/T, L/C, Western Union, Credit Card, Alibaba Trade Assurance |
Product Name: Metal Serrated Steel Grid Grating To Construction Building Material |
Contact Person: Mr. Devin Wang
Fax: 86-318-7896133