Payment & Shipping Terms:
|Hole Type:||Hexagon||Hole Size:||18mm|
|Mesh Size:||1m X 25m||Weight:||650g/m2|
welded wire panels,
welded wire fabric
Grass Protection Mesh for Car Park with 100 percent recycled High Density Polyethylene
These heavy duty rolls are suitable for many applications: Turf reinforcement Boggy ground stabilization Car park or heavy traffic areas Caravan sites Entrance or driveways Pathways With 18mm mesh the grass is allowed to grow through creating a strong and stable grassed surface, which will increase traction.
Grass Mesh for Turf and Lawn Reinforcement
Grass Mesh – Light Duty is an extruded plastic mesh for the protection and reinforcement of grass and turf. The grass reinforcement mesh stabilises the grass and enables the grass to intertwine with the plastic mesh filaments creating a strong stable reinforced grassed surface. The turf protection mesh is ideal for pedestrian and light vehicle use such as ride on mowers and golf buggies.
The grass and lawn reinforcement mesh is available in black & green in both light and heavy duty grade. This grass mesh is manufactured from 100% recycled High Density Polyethylene (HDPE).
Light Duty Grass Mesh and SUDS
Grass Mesh – Light Duty can be used in Source Control applications as part of Sustainable Urban Drainage System (SUDS) and is the perfect alternative to impermeable paved surfaces where natural grassed traffic routes and driveways are preferred and where planning restrictions are applied or cost savings are being considered.
This grass protection mesh is slip resistant and is supplied on 2m x 30m rolls in two thicknesses (Standard 550g/m2 & Premium 660g/m2) as determined by the application and manufactured from partly recycled UV Stabilised polyethylene (Approx 20% recycled polymer)
Please note that with all plastic products, the product can become slippery on damp or wet conditions if used before any grass has grown.
Specification: Material: HDPE Weight: 650gsm Size: 25m long x 1m wide Hole size: 18mm
Specification: Material: HDPE Weight: 650gsm Size: 10m long x 1.5m wide Hole size: 18mm
Specification: Material: HDPE Weight: 650gsm Size: 10m long x 1m wide Hole size: 18mm
|Product||Roll Size||Initial Roll (Number of Pins)||Subsequent Rolls (Number of Pins)|
|Grass Reinforcement Mesh||2m x 20m||200 pins (4 bags of 50)||150 pins (3 bags of 50)|
|Grass Reinforcement Mesh||2m x 10m||150 pins (3 bags of 50)||100 pins (2 bags of 50)|
|Grass Reinforcement Mesh||1m x 10m||100 pins (2 bags of 50)||50 pins (1 bag of 50)|
|Turf Reinforcement Mesh||2m x 30m||150 pins (3 bags of 50)||100 pins (2 bags of 50)|
|Turf Reinforcement Mesh||2m x 10m||50 pins (1 bag of 50)||50 pins (1 bag of 50)|
Contact Person: Victor Meng