BTO-22 Hot Galvanized Zinc Coated Galvanized Concertina Wire Fence

BTO-22 Hot Galvanized Zinc Coated Galvanized Concertina Wire Fence

 
Concertina razor wire fence descriptions:
2" GI Razor Blade Mesh × 10 SWG × 1.830 Height

• Galvanized concertina wire coils:
  • Barbed tape Coil Diameter: 730 mm.
  • Diameter. After expansion: 620 mm.
  • Expandable length: 12 cm.
  • Core wire Diameter: 2.5 mm.
  • Blade thickness: 0.5 mm.
  • Spiral Turns per coil: 55.
  • Clips for Spiral: 5.
  • Weight : 10.5 KGS. Approx.
  • Vertical Post: 2" GI Pipe
  • Regular Specification on the post: thickness: 3.9 mm.
  • Each post: 2.72m length.
• Corner Post: 3" GI Pipe.
  • The thickness: 4.0 mm.
  • Post Height: 2.8 m in length.
• Gate:
  • 1 m Gate: Door post: Diameter. 75 mm × 4.0 mm thick × 2.8 m height.
  • Door frame: Diameter 48 mm × 3.0 mm thick × 1.83 m height.
  •  

Here show galvanized razor wire new specifications.
ART 65 material hot dipped galvanized zinc

• Thickness: 0.50 mm +/- 0.05 mm.
• Wire diameter: 2.5 mm +/- 0.05 mm.
• Bars length: 65 mm +/- 1 mm.
• Bars width: 21 mm + / - 1 mm.
• Bars spacing:100 mm +/- 2 mm.
• 450mm diameter and 35 rings.
• Straight length: 46.5 m per roll after pull open.
• Standard covered length: 10 m.
• Inner packing is plastic film.
• Outer packing in weaving bag strip.

CBT-65 - Material. HD Galvanized Zinc

• Thickness: 0.50 mm +/- 0.05 mm.
• Wire diameter: 2.50 mm +/- 0.05 mm.
• Bars length: 65 mm +/- 1 mm.
• Bars spacing: 100 mm +/- 2 mm.
• 450 mm diameter and 35 rings.
• Straight length: 46.5 m per roll after pull open.
• Standard covered length: 10 m.
• Inner packing: in plastic film.
• Outer packing: in weaving brag strip.

Razor Wire Production Processing

Razor Barbed Wire Production line must include 4 stations:

1. Razor Blade Punching Station: Decoiler, Press, Recoiler.
2. Concertina Razor Blade Profiling Station: Decoiler, Wire Stand, Profiler.
3. Clipping Station.
4. Packing Station How to make the razor wire? Here are the detailed production processing about it.
   First, the raw material is the galvanized sheet, stainless steel sheet or low carbon steel sheet, then cut the bar of tapes. The width of bar can be changeable according to the razor type.
   Second, the razor wire cutting machine perforates the bars, then divides the sheet to two layers. With the processing of cutting, then get into the process of blade. Flatten the blade bar.
   Third, combine the blade bar and inner wire. The wire is usually using stainless steel wire or iron wire. The wire in the middle of blade bar, with the machine, then the blade bar wrappers the wire. Last form the razor barbed wire, then pack the razor barbed wire into rolls. In the surface, use the sack cloth for package. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

concertina razor wire-CRW001
 

concertina razor wire-CRW002